Category Hub · Roofing & Facade Cladding

Roofing & Facade Cladding Supplier China for Building Exteriors

Source metal roof sheets, sandwich panels, aluminium composite panels, solid aluminium and fibre cement cladding, louvres and metal ceilings from verified Chinese factories, with coating and fire-class document review, pre-shipment QC and supervised container loading.
Metal Roofing & Sandwich Panels
Facade Cladding & Louvres
Fire Class & Coating Checks
Container Loading Supervised

The Buyer Challenge

Facade Problems Don't Show Up at Handover. They Show Up After the First Summer

Roof sheets and cladding panels can look identical on the sample board and very different on the building. Fading coatings, mismatched colour batches and the wrong core material usually trace back to a few recurring sourcing mistakes.

Thinner substrate than ordered

Steel or aluminium quoted at one thickness and supplied below it. Panels dent, ripple or fail wind-load checks.

Wrong coating system

Polyester paint supplied where PVDF was specified. The colour fades and chalks within a few years of strong sun.

Combustible ACP core

PE-core composite panels supplied for a facade that needs an FR or A2 core under the local fire code.

Colour batch mismatch

Panels from two coil batches installed side by side, with a visible shade difference across the elevation.

Incomplete system

Panels shipped without matching flashings, fixings, sub-frame or sealant, leaving the installer to improvise on site.

Damaged on arrival

Scratched film, bent edges and crushed panel ribs because the crates or loading plan did not suit long lengths.

How JEES Works

JEES Global Helps You Source Roofing & Facade Materials You Can Actually Trust

From specification review to container loading, every step is handled by a team that reads elevation drawings, panel schedules and coating certificates as well as price lists.

Step 01

Review Specs & BOQ

We study panel types, substrate thickness, coating system, fire class and colour references.

Step 02

Shortlist Factories

We compare factories on product line, certifications, capacity and lead time.

Step 03

Approve Samples & Colours

Physical samples, colour chips and coating and fire test reports approved before order.

Step 04

Inspect, Pack & Ship

Pre-shipment QC, colour batch control, export documents and supervised container loading.

Product Categories

Roofing & Facade Materials We Can Help You Source

Metal Roofing, Sandwich Panels, Facade Cladding & Metal Ceilings
Building corner clad in yellow and red corrugated metal sheets

PPGI & PPGL Roof Sheets

Pre-painted galvanised and galvalume steel sheets in corrugated and trapezoidal profiles, cut to length.

Close-up of a metal roof with seams against the sky

Standing Seam Roofing

Concealed-fix aluminium or steel standing seam systems with clips and roll-formed panels.

Industrial building with panel walls and a large loading door

PU & PIR Sandwich Panels

Insulated roof and wall panels with steel skins and a polyurethane or PIR core.

Modern industrial building with panel walls and large windows

Rockwool Sandwich Panels

Non-combustible mineral wool core panels for roofs, walls and fire-separation partitions.

Close-up of a dark tiled roof surface

Stone-Coated Steel Roof Tiles

Steel roof tiles with a granular stone finish in shingle, bond and classic profiles.

Roof skylight bringing daylight into a building interior

Polycarbonate & FRP Skylight Sheets

Translucent sheets in matching roof profiles that bring daylight into metal-roofed buildings.

Tall building with white panel facade against a blue sky

Aluminium Composite Panels (ACP)

Aluminium skins bonded to a PE, FR or A2 core, with PVDF or polyester coatings.

Building facade with vertical perforated metal panels

Solid Aluminium Panels

Single-skin aluminium panels, flat, folded, perforated or 3D, made to your panel drawings.

Building facade with layered grey cladding and large windows

Fibre Cement & HPL Cladding

Through-coloured or coated fibre cement boards and HPL panels for rainscreen systems.

Curved terracotta facade on a modern building

Terracotta Facade Panels

Extruded terracotta panels and baguettes for ventilated facades on aluminium sub-frames.

Building facade with vertical slats for sun shading

Aluminium Louvres & Sunscreens

Fixed or operable aluminium louvres, fins and screens for shading and plant-room ventilation.

Lobby with a decorative suspended ceiling

Metal Ceilings & Soffits

Aluminium clip-in, lay-in, strip and baffle ceilings, plus external soffit panels.

Custom Specifications

Specified Around Your Building Exterior

The earlier we see your elevations and panel schedule, the faster factories can match substrate, coating, core, fire class and colour. This checklist covers what we usually confirm before quoting.

You can also explore our complete project quote workflow or learn more about JEES Global.

Specification Checklist

14 Items
Application (roof, wall, soffit, canopy, ceiling)
Panel type and system (exposed or concealed fix)
Substrate (steel, aluminium, fibre cement, terracotta)
Substrate thickness and panel size
Coating system (polyester, HDP, PVDF, powder)
Colour reference (RAL or sample) and gloss
Reaction-to-fire class or facade fire test
Civil Defence or local approval list
Core type and thickness for ACP or sandwich panels
Wind load and span requirements
Flashings, fixings, sub-frame and sealants
Area in m² or linear metres per panel type
Site location and exposure (coastal, desert)
Destination port and shipping term

Factory Coordination

Match the Right Factory to the Right Panel Without Calling Five Suppliers Yourself

We are not tied to one factory. We compare roofing, sandwich panel and cladding manufacturers in China by product line, coil source, certifications and lead time before recommending a shortlist.

Compare Roofing & Cladding Manufacturers
One Factory Alone
One factory's catalogue, take it or leave it
Coating and fire claims taken on trust
Panels and accessories from unrelated suppliers
No colour samples before bulk order
Buyer manages loading and damage claims alone
JEES Coordination
Multiple factories compared on product line and certifications
Coating and fire reports reviewed against EN, ASTM and local references
Panels, flashings and fixings checked as one system
Approved samples and colour chips kept on file
Crating and loading plan supervised at the factory

Quality Inspection

Quality Checks Before Panels Leave the Factory

Most facade problems we see at site were already visible in the factory: a thin substrate, the wrong coating, a PE core where FR was ordered. Pre-shipment inspection is a built-in step, not an upsell.

Pre-Shipment Inspection Checklist

Substrate and skin thickness measured on samples
Paint film thickness checked against the order
Colour compared with the approved sample
ACP and sandwich panel core checked on cut samples
Fire class and coating certificates reviewed
Profile, length and flatness against drawings
Protective film, edge guards and crating
Container loading plan and crate count

Export & Shipping

From Factory Crate to Container Shipment

Long roof sheets and coated panels scratch, bend and dent when packing or loading is rushed. We plan crating, paperwork and loading so what arrives matches what was ordered.

Step 01

Crate & Protect

Sheets bundled on timber skids, panels film-protected and crated with edge guards for long lengths.

Step 02

Prepare Documents

Coating and fire test reports, colour batch records, packing list, commercial invoice and certificate of origin.

Step 03

Load & Ship

FOB, CIF or CFR with on-site loading supervision and final crate-count verification.

Project Use Cases

Roofing & Facade Materials for Different Project Types

Typical applications where JEES Global sources roofing and cladding, from warehouse roofs to hotel facades.

Discuss your project

Hotels & Mixed-Use

ACP or solid aluminium facades, terracotta feature walls, louvres and metal soffits at entrances.

Warehouses & Logistics

PPGI roof and wall sheets, rockwool or PIR sandwich panels and skylight sheets.

Factories & Industrial

Rockwool sandwich panels for fire separation, standing seam roofs and ventilation louvres.

Cold Rooms & Food Plants

PU or PIR sandwich panels with food-safe coatings and matching trims.

Offices & Commercial

Rainscreen cladding in ACP, fibre cement or HPL with sub-frames, plus metal lobby ceilings.

Villas & Residential

Stone-coated steel roof tiles, fibre cement cladding and aluminium soffits.

Why JEES

Why Buyers Choose JEES for Roofing & Facade Sourcing

Practical reasons consultants, contractors and developers use one China contact for their roof and facade packages.

Specification and panel schedule review before quoting

Factory shortlist based on actual product line

Independent review of coating and fire reports

Panels, trims, fixings and sealants checked as one system

Civil Defence and local fire code awareness

Colour and sample approval before bulk production

Colour batch traceability per crate

Supervised loading with photo and video proof

Trust & Proof

Proof Buyers Can Review Before Ordering

Before any container ships, you receive a proof pack covering test reports, certificates, sample photos and loading, so the order is verified, not promised.

Approved Samples

Photos of the approved panel sample alongside its colour chip and batch number.

Coating Test Reports

Coating type and thickness reports tied to the supplied coil or batch.

Fire Class Certificates

EN 13501-1, ASTM or local fire-rating certificates for cores and panels on file.

Colour Batch Records

Coil and batch numbers recorded per crate to keep each elevation consistent.

Crate Inspection Photos

Crate-level photos showing film, edge protection, labelling and condition.

Container Loading Photos

Loading sequence and final container photos before seal.

ISO & Approval Certificates

Factory ISO 9001 and project-specific approvals where available.

Final QC Reports

Pre-shipment QC reports with measurements and photos per shipment.

We don't publish fake badges or stock photos. Real proof (sample, inspection, packaging and loading photos) is shared per order to your team and procurement records.

Prepare Your Quote

What We Need to Prepare Your Quote

Send what you have: a BOQ line, an elevation drawing or even a site photo is enough to start. We come back with shortlisted factories and clear quotations.

BOQ extract or scope note

Elevations or roof plan (PDF/DWG)

Area in m² per panel type

Panel type & thickness

Fire class & approvals

Coating & colour reference

Core type for ACP or sandwich panels

Destination port

Sourcing notes

Roofing and facade sourcing notes

Roof sheets and cladding panels are priced by area, but their service life depends on substrate thickness, coating and core. Two quotes for the same profile can differ because one of these three was changed.

Substrate and coating

State base metal thickness, metallic coating (galvanised or galvalume) and paint system in the order. Coil-coated steel is commonly referenced to EN 10169 or ASTM A755, and architectural aluminium coatings to AAMA 2605 or Qualicoat. PVDF holds colour longer than polyester in strong sun. Measure substrate and paint thickness on delivered goods, not only on the approval sample.

Core and facade fire rules

Composite and sandwich panels are judged by their core. Many markets now restrict PE-core panels on tall or public buildings and require FR or A2 cores, or a full facade fire test such as BS 8414 or NFPA 285. Sandwich panels are commonly referenced to EN 14509. Confirm the rule for your building before comparing prices, and ask for the certificate covering the exact core supplied.

Long lengths and the container

A 40-foot container has an internal length of just over 12 m, so longer sheets cannot ship in one piece. Agree panel lengths with the designer early, plan crates by length and weight, and include freight in the landed cost calculation.

Documents to request before you approve bulk production
  • Coating type and thickness report
  • Fire classification certificate for the core or panel
  • Approved colour sample with coil or batch numbers
  • Shop drawings with panel lengths, profiles and fixings

Sourcing gypsum, mineral fibre or PVC ceilings for interiors? Those are covered with our wall panel and interior finish sourcing.

Written by the JEES Global sourcing and QC team. Last reviewed November 2026. Standards named here are references to confirm for your project and market.

Illustrative photos via Unsplash by Simone Hutsch, set.sj, Lukáš Patúc, Esphera ArqEng, Syahfira Puri, Matthew Hernandez, Artur Voznenko, laura adai, Andrea Clerc, Declan Sun, simon reeve, Andy Wang. Project and inspection photos are shared per order.

FAQ

Roofing & Facade Cladding Sourcing from China: FAQs

01 Does JEES Global supply both roofing and facade cladding?

Start Sourcing

Send Your Roofing & Facade Requirements

Share your drawings or panel schedule, coating and colour, fire class, approval list and destination port. We come back with shortlisted factories, sample data and clear quotations.

Reply within 1 business day
NDA available on request
Free sourcing consultation

What to Include in Your Inquiry

Company & contact details
Country / destination port
Application (roof, wall, soffit, ceiling)
Panel type, substrate, thickness
Coating system & colour
Fire class & local approvals
Area in m² per product
Target lead time

Prefer to talk first? Visit our contact page or browse how JEES Global works.

Scroll to Top