A window quote from China usually lists a size, a colour and a price per square metre. That is not enough to buy windows. Two quotes with the same price can differ in profile wall thickness, coating system, glass build, hardware and test evidence, and those differences decide whether the windows leak, fade or jam in five years.
This guide gives the specification and inspection points for aluminium and uPVC windows and doors ordered from Chinese factories, aimed at contractors, developers and distributors.

1. Start from a window schedule, not a catalogue
Give each opening a reference, size, opening type, glass type, colour and quantity. Without a schedule, the factory quotes standard sizes and surprises appear at installation. If you have drawings, send them with the schedule. Our guide to writing a BOQ or material list that Chinese factories can quote shows the format factories can price accurately.
2. Specify the profile, not just the material
| Item | What to write into the order |
|---|---|
| Aluminium alloy and temper | The alloy and temper named in your specification |
| Wall thickness | Minimum thickness per profile, from your specification or the system supplier, not “standard” |
| Thermal break | Whether required, and the type |
| uPVC profile | Chamber count, wall thickness, steel reinforcement where required |
| Corner joints | Mechanical crimping or welding method, per the system |
Take limits from your specification or the profile system’s technical data. Do not accept numbers from a quote without the document behind them. At inspection, cut a corner sample or use a profile sample and measure wall thickness with a caliper.
3. Specify the finish by system and by third party
For powder-coated aluminium, ask which coating system and whether the powder coater is licensed under an independent quality scheme such as Qualicoat. Qualicoat is a not-for-profit quality label for coatings on aluminium for architectural use, and its specification is aimed at powder coaters, pretreatment manufacturers and powder manufacturers; the 26th Edition has been published and the association urges specifiers and contractors to check their supply chains follow the current edition (Glass Times report). For anodised finishes, name the class and the standard you want.
Ask for the coater’s licence or the finish test report for the exact colour, and approve a colour sample under agreed light. Batch colour consistency matters on large projects: see approved sample vs bulk production. For colour, specify the RAL or the reference chip, and confirm gloss.
4. Define the glass build
Windows are as much glass as frame. State the glass type, thickness, coating, spacer, gas fill and edge work for each opening, and whether laminated or tempered glass is needed at doors, low panes and balconies. Our glass systems page covers glass sourcing, and the certificate and test-report approach is covered in building material standards by destination market.
5. Name the performance standard for your market
Air permeability, water tightness and wind resistance are tested under a product standard, and the one that applies depends on your market. In Europe, EN 14351-1 is the harmonised product standard for windows and external pedestrian doorsets under the Construction Products Regulation, and it does not cover revolving doors, internal doorsets or curtain walling (Intertek summary of EN 14351-1). Other markets use their own standards. Ask for test reports on the system and size range you are buying, and check that the report names the same profile system and glass build as your order. See also product certification and compliance.
6. Check hardware, gaskets and seals
Hardware causes many service calls. Name the brand or quality level of hinges, handles, locks and multipoint mechanisms, and the gasket material. Sample operation: open and close sampled windows many times, check alignment, and check that drainage and weather seals are in place. Ask for the factory to confirm the screws and fasteners material for coastal projects.
7. Inspect in three steps
- Pre-production: approve a complete sample window, including corner cut, hardware and glass, and keep it as the reference.
- In production: check profile thickness, finish and the first assembled frames against the sample.
- Pre-shipment: sample finished windows for dimensions against the schedule, diagonals, glazing, operation, finish and labelling by opening reference.
Process detail is in the pre-shipment inspection guide, the quality control checklist for tiles, sanitary ware and doors and our doors and windows sourcing page. JEES Global sends a photo report within 48 hours of an inspection.
8. Packing and shipping
Glass and finished aluminium need protection from scratches and shocks. Specify film on profiles, corner guards, frame separators, labelling by opening reference and packing order that follows installation sequence. Weight is rarely the limit on window loads, volume is, but packing in crates adds tare. See export packaging for building materials and container weight limits.
Mistakes that lead to claims
- Ordering from a catalogue size list rather than a window schedule.
- Leaving wall thickness and coating system out of the order.
- Accepting test reports for a different profile or glass build.
- Skipping a full sample window before production.
- Mixing opening references on pallets.
Frequently asked questions
What should I specify besides size and colour?
Profile alloy and wall thickness, thermal break, finish system, glass build, hardware level and the test standard for your market.
How do I check the powder coating?
Ask which coating system is used and whether the coater is licensed under an independent scheme such as Qualicoat, then approve a colour sample and request the finish test report.
Which standard covers window performance?
That depends on your market. In Europe EN 14351-1 is the product standard for windows and external pedestrian doorsets.
Aluminium or uPVC?
Choose by climate, budget, design and local practice. Specify the profile quality for either, since both vary widely between factories.
Related: Whole-project material sourcing